Rapid Field Setup
Deployable in under 15 minutes by non-specialist crews without cranes or heavy excavation machinery.
British Engineering Excellence
Portable Off-Grid Power Systems
Rapid-deployment wind, solar, and hybrid power stations engineered for continuous performance in extreme remote infrastructure.
Instant Plug & Play Energy
Rapid Deployment Power.
Wherever The Grid End.
Engineered in Herefordshire, UK, our self-contained portable off-grid power units eliminate civil works, concrete foundations, and complex on-site assembly. Designed for immediate deployment in temporary sites, environmental surveys, security outposts, and emergency response infrastructure.
Fully Self-Contained
Integrates solar generation, wind power options, deep-cycle battery storage, and MPPT charge management into a single enclosure.
Standard Logistics Ready
Built to standard ISO pallet dimensions or Pelican transit specification for effortless transport via air, road, or sea freight.
Extreme Environment Proven
Marine-grade coatings, IP67 containment, and wind survival rating tested to sustained speeds above 27 m/s (60 mph).
Engineered Product Range
Modular Portable Off-Grid Power Stations.
Compare our industrial-grade portable power units. Each architecture can be tailored to match your precise continuous load requirements and battery autonomy profile.
PowerBox 2
A secure, all-weather portable hybrid power box designed for high-capacity continuous off-grid demands. Features an integrated telescopic mast and fold-out monocrystalline solar PV arrays.
Daily Generation1.3 kWh PV / Wind Hybrid
Battery CapacityUp to 30 kWh AGM/LiFePO4
Optional Fuel CellUp to 128 kWh Autonomy
Telemetry & ControlVictron Cerbo GX & 4G/Sat
Primary Applications: Remote telecom repeaters, Starlink satellite stations, LiDAR wind profiling, coastal defence monitoring, construction security compounds, and mobile command centers.
PowerCase
Encapsulated in an IP67 Pelican transit case, PowerCase delivers immediate, resilient power for mobile technicians, scientific field crews, and temporary IoT sensor outposts.
Enclosure RatingIP67 Heavy-Duty Pelican Case
Solar CompatibilityPlug & Play Foldable Arrays
Battery StorageHigh-Density AGM / Lithium
Deploy TimeUnder 3 Minutes
Primary Applications: Environmental sensing, field survey gear, portable weather stations, emergency search and rescue power, and rapid IoT network deployment.
Resource-Calculated Engineering
How We Guarantee Year-Round Power Reliability.
Unlike generic commercial power packs, every Leading Edge Power installation is sized using satellite meteorological reanalysis to prevent unexpected site outages during severe winter conditions.
Resource Assessment
We extract 40-year ERA5 solar irradiance and Global Wind Atlas wind velocity data for your deployment coordinates.
Worst-Month Sizing
Generation capacity is calculated against December/January solar minima, guaranteeing safety headroom even without sunlight.
In-House Assembly
Turbines, charge controllers, wiring looms, and enclosures are hand-assembled and factory pre-commissioned in Herefordshire.
Global Telemetry
Integrated 4G or satellite telemetry transmits continuous voltage, state of charge, and generation telemetry directly to your desk.
Technical FAQ
Frequently Asked Buyer Questions.
Our portable systems, such as the PowerBox 2 and PowerCase, are engineered for plug-and-play field setup. They require zero concrete foundations or ground excavation and can be fully operational in 3 to 15 minutes depending on the array configuration.
Yes. Every unit is engineered with high-efficiency solar arrays, optional vertical or horizontal wind turbines, and multi-day battery autonomy. For critical infrastructure, an optional methanol fuel cell back-up can be integrated to ensure 100% uptime during winter months.
Yes. The PowerBox 2 is dimensioned to standard ISO pallet footprints, allowing simple handling via forklift, crane, or standard transport vehicles. PowerCase complies with standard air and sea cargo weight and size dimensions for rapid global logistics.
Every system includes cloud telemetry capabilities via built-in Victron Cerbo GX hardware. You can log in via desktop or mobile app to monitor state of charge, solar/wind generation, load draw, and historical operational data anywhere in the world.
Request a Custom Portable Power Specification
Send your continuous load requirements and target site coordinates to our UK engineering team. We will deliver an exact resource analysis and system recommendation within 24 hours.